Tee It Up

One of the smaller things that we make here in the maintenance shed are the tee markers and the broken tee holders that you see on the tee boxes out on the golf course. Ever since we made the switch to concrete, the tee markers have held up better than the old wooden ones. The tee markers are made with three different types of concrete to help with a faster set time and to insure durability. After a good mix of concrete is made it is poured into the mold and after a day it's ready to be removed and set to dry. When the tee markers have set for a few days and have finished hardening we then put a coat of paint to identify where they will be placed out on the golf course.

The other thing that needs addressing this time of year are the broken tee holders. The didn't make it through the season last year. A lot of the holders were broken with pieces hanging out. This winter we are making 18 brand new broken tee holders. Hopefully they will make it through the season in one piece. Below are some pictures of the two projects in action.

Create a Crate

During the off season the maintenance crew is determined to stay busy.  Another project that we have started is to build new ball crates for the driving range. These crates will be used on the driving range tee instead of the current buckets.

The crates have been designed with a dual purpose in mind.  They will be just the right size to alleviate the need for a boundary board to designate the hitting stations while holding all the range balls. The crates will be spaced to the proper distance giving the golfer room to hit while giving it a cleaner look.  The pictures below show the process of us putting the crates together.

New Path for the Alternate Driving Range Tee

These last few weeks we have begun an addition to our cart path. We have felt there was a need to modify the mulch path that cut through from #1 to #4 to concrete.  This new concrete path will be for golfers to get to and from the alternate driving range tee.  The new path will be 7 feet wide which will also help accommodate the maintenance crew maneuver our larger equipment around the course. There will be three phases to this process.  Phase 1 was completed by removing all of the mulch from the existing path.  We then painted white lines to set the boundary of the concrete path. Then we excavated the dirt out to a depth of about 8".  Once the material was removed we brought in AB3 gravel and compacted it down to create a foundation for the new path in preparation for the concrete.  Phase 2 will consist of forming up the sides and laying re bar along the top of the AB3.  Phase 3 will then consist of pouring the concrete and smoothing it out for the final look.  

Opening Up the Rough

The Blue Hills Crew took advantage of the weather that we had this past month with the high close to 50 degrees and cut down a few more trees. The trees that were in question were located on hole 11, just past the start of the fairway on the left hand side.  It was a group of pine trees that were posing a problem agronomically as well as for playability purposes. Removing these pines will definitely help with the turf growth in the rough with their absence and the fairway will benefit as well.  Looking at the playability  aspect of this decision, when your golf ball would land near this area the shot would be very difficult to recover from and land back into the fairway. The removing of these trees will at least help your chances of recovering and landing back into the fairway, but the shot still leaves it difficult to go for the green. The next grouping of trees acts as another barrier to keep the hole challenging.